INTRODUCTION

Overture PETG filaments are made of premium PETG resin which combines the advantages of PLA and ABS such as odorless, esay-to-print, little shrinkage rate; Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility

Over 8 years experience of researching and manufacturing 3D printer filaments, Overture care about every detail when we design our spool and filaments.?

Buy with Confidence, 100% Satisfaction Guarantee. E-mail us if you have any issues or questions, we will make every effort to provide you with immediate help until you are satisfied.

SPECIFICATIONS

• Young’s modulus (X-Y) 1472 ± 270 (MPa)
• Tensile strength (X-Y) 31.9 ± 1.1 (MPa)
• Elongation at break (X-Y) 6.8 ± 0.9 (%)
• Bending modulus 1174 ± 64 (MPa)
• Bending strength 53.7 ± 2.4 (MPa)
• Charpy impact strength 5.1 ± 0.3 (kJ/m2)

FAQs:

Why can’t the filaments stick to the build bed?

1. Check the temperature setting before printing, PETG filaments have higher extrusion temperature than that of PLA;

2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion;

3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;

4. If the effect is not good, it is recommended to try printing the draft before printing.